Three Way Catalytic Converter Guide: Advanced Euro 6 vs Euro 7 Emission Upgrade Comparison

Введение

The transition from Euro 6 to Euro 7 marks a major shift in European emission-control regulations. These new rules reshape catalyst design, durability expectations, and real-world performance requirements. They also increase the technical burden on трехкомпонентные каталитические нейтрализаторы, diesel aftertreatment systems, and particulate-control technologies. To comply with Euro 7, manufacturers must improve catalyst activity, reduce ultrafine particles, manage new pollutants, and ensure long-term system stability.

Euro 7 expands pollutant categories, tightens durability limits, and adds new test conditions that capture real-world driving more accurately than Euro 6. This pushes catalyst engineering toward faster light-off performance, better thermal resistance, and enhanced monitoring strategies.

Euro 7 Represents a Major Step Beyond Euro 6

Euro 6 regulations have controlled NOx, CO, PM, and hydrocarbon emissions since 2014. Euro 7 builds on this foundation but broadens the scope. It adds ammonia and nitrous oxide limits, regulates particles from 10 nm, and introduces standards for brakes and tires.

Euro 7 differs from Euro 6 in several ways:

• Wider pollutant coverage
• Longer durability requirements
• Stricter Real Driving Emissions tests
• New particle-number thresholds (PN10)
• Lower-temperature and lower-load evaluations
• Regulation of non-exhaust emissions
• Battery performance requirements for electric vehicles

These changes require more advanced catalyst chemistry and stronger system integration.

Catalyst Durability Requirements Increase

Euro 7 requires catalytic converters and filters to remain effective for 200,000 km or 10 years, which doubles Euro 6’s 100,000-km requirement. Manufacturers need stronger substrates, more stable washcoat formulations, and optimized PGM distribution.

To meet durability goals, catalyst engineers focus on:

• Thermal-resistant substrate materials
• High-stability oxygen-storage components
• Strong washcoat adhesion
• Optimized precious-metal loading
• Improved flow-channel design

Euro 7’s OBD rules also require earlier detection of catalyst degradation, which demands more sensitive monitoring sensors and software.

Ultrafine Particle Regulation (PN10)

Euro 7 regulates particles down to 10 nm (PN10), while Euro 6 covered only 23 nm (PN23). This forces the adoption of higher-efficiency gasoline particulate filters and more advanced diesel particulate filters.

To meet PN10, engineers improve:

• GPF coating uniformity
• Filter pore structure
• Catalyst heat-up behavior
• Regeneration strategies

This impacts gasoline, diesel, and hybrid powertrains.

New Pollutant Categories

Euro 7 introduces new emission limits that influence catalyst chemistry.

Ammonia (NH₃)

Euro 7 restricts ammonia slip from SCR systems. Manufacturers must use:

• Optimized urea dosing
• Higher-capacity SCR catalysts
• Ammonia-slip catalysts (ASC)

Nitrous Oxide (N₂O)

N₂O becomes a regulated pollutant. Catalyst choices shift toward:

• Vanadium-based SCR systems (lower N₂O) over copper-zeolite SCR

This change reduces greenhouse-gas emissions and improves real-world performance.

Real-World Driving Emissions Testing

Euro 7 expands RDE test coverage. Catalyst systems must work at:

• Lower speeds
• Lower engine load
• Lower exhaust temperatures
• Wider ambient-temperature ranges

Manufacturers must implement faster light-off for трехкомпонентные каталитические нейтрализаторы using:

• Higher-activity PGM formulations
• Thin-wall substrates
• Electrically heated catalysts
• Improved thermal insulation
• Optimized placement closer to the engine

Table 1. Euro 6 vs Euro 7 Key Technical Differences

Euro 7 Requirements for Diesel Engines

Diesel systems must integrate:

• Larger DPF volume
• More efficient SCR catalysts
• Vanadium-based systems for lower N₂O
• Improved urea-injection control
• Better heating and mixing strategies

These enhancements ensure stable NOx conversion during low-speed, low-load city driving.

Euro 7 Requirements for Gasoline Engines

Gasoline vehicles depend on the трехкомпонентный каталитический нейтрализатор. Euro 7 raises expectations for:

• Сокращение выбросов CO
• Hydrocarbon control
• Сокращение выбросов NOx
• N₂O suppression

Gasoline direct-injection engines also require improved GPF performance to meet PN10 standards.

Non-Exhaust Particles

Euro 7 introduces limits for particles from:

• Brake pads
• Brake rotors
• Tires

This applies to internal-combustion vehicles and electric vehicles. Manufacturers respond with low-wear materials and dust-collection systems.

Broader Climate Policy Context

Euro 7 supports the European Green Deal and Climate Law. These policies target:

• 55% GHG reduction by 2030
• Net-zero emissions by 2050

Euro 7 drives real-world emission reduction instead of laboratory-only compliance.

Euro 6 Pollutant Limits (Reference)

Euro 7 will introduce stricter limits, broader testing scenarios, and longer durability requirements.

Euro 7 Implementation Timeline

• 1 July 2025: Cars and light vans (M1, N1)
• 1 July 2027: Buses and heavy-duty vehicles (M2, M3, N2, N3)
• 1 July 2030: Small-volume manufacturers

Vehicles that do not meet Euro 7 cannot enter the market after these dates.

Заключение

Euro 7 represents one of the most significant regulatory upgrades since Euro standards were first introduced. It raises durability expectations, adds new pollutants, regulates ultrafine particles, and expands real-world driving requirements. Трехкомпонентные каталитические нейтрализаторы must deliver faster light-off and more efficient NOx control while lasting 200,000 km. Diesel systems must handle ammonia slip, N₂O formation, and low-temperature NOx conversion with greater accuracy.

Euro 7 pushes catalyst engineers, manufacturers, and material scientists to innovate. Its implementation accelerates Europe’s progress toward cleaner air and aligns transportation with long-term climate goals.